After the two screws are installed that hold the speed change assembly on the belt housing.
A view of the spindle speed change plate installed.
The two mounting holes for the speed change face plate.
After the two screws are installed that hold the speed change assembly on the belt housing.
The speed change assembly is held on the belt housing by two socket head screws that go here.
The spindle speed change plate. The long screws hold the speed change assembly on to the belt housing. The little screws hold the face plate on.
Tighten the 3 cap screws down and you've installed the bearing cap. Next!
Another view of where you install the bearing cap screws.
expressline99

After the two screws are installed that hold the speed change assembly on the belt housing.

Media information

Album
Bridgeport Series 1 VS 2hp reinstalling lower/upper belt housing on the head
Added by
expressline99
Date added
View count
900
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/81 second(s)
ISO
216
Flash
Auto, did not fire
Filename
DSCN5759.JPG
File size
2.2 MB
Date taken
Tue, 23 May 2017 5:08 PM
Dimensions
3648px x 2736px

Share this media

Back
Top