Press the spindle pulley hub into the stationary vari-disc pulley.
Install the snap ring like this. This will help keep the Key from coming out if it loosens up. Mine was lodged elsewhere in the gear housing.
Install the snap ring on the spindle pulley hub.
Snap ring that holds the stationary vari-disc pulley in place.
Press the spindle pulley hub into the stationary vari-disc pulley.
The spindle pulley hub key is square.
Time to install the key into the spindle pulley hub. (note this is spindle pulley hub that was broken in my original post.) This one is brand new.
Install the bearing spacer ring. It just slides into place. At this point you want to check and make sure the brake bearing cap spins without binding.
expressline99

Press the spindle pulley hub into the stationary vari-disc pulley.

Media information

Album
Bridgeport Series 1 VS 2hp belt housing tear down and rebuild
Added by
expressline99
Date added
View count
749
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/62 second(s)
ISO
295
Flash
Auto, did not fire
Filename
DSCN5561.JPG
File size
2.1 MB
Date taken
Sat, 15 April 2017 1:42 PM
Dimensions
3648px x 2736px

Share this media

Back
Top