These are the 4 cap screws you'll use to attach the upper belt housing to the lower belt housing.
Use these two screws with the pivot sleeves to mount the speed change plate to the sliding bearing housing.
The other two shorter cap screws go here. This will mount the upper belt housing to the lower belt housing. Only a few more steps to go!
The two long cap head screws go here.
These are the 4 cap screws you'll use to attach the upper belt housing to the lower belt housing.
Just in case you forgot we are going to take this rebuilt upper belt housing...flip it over and place it on top of the Lower belt housing.
Use the other 2 cap screws here to finish securing the lower belt housing to the heaad unit. These are on the front.
Use 2 of the cap screws here. These two holes are in the back.
expressline99

These are the 4 cap screws you'll use to attach the upper belt housing to the lower belt housing.

Media information

Album
Bridgeport Series 1 VS 2hp reinstalling lower/upper belt housing on the head
Added by
expressline99
Date added
View count
705
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/42 second(s)
ISO
400
Flash
Auto, did not fire
Filename
DSCN5732.JPG
File size
2.2 MB
Date taken
Sat, 20 May 2017 6:39 PM
Dimensions
3648px x 2736px

Share this media

Back
Top