Still Digging Thru Things, 3c Collet Holder

dlane

Active User
Registered
Joined
Sep 27, 2014
Messages
3,123
found this in a box of stuff I got from cl add , it uses 3c collets I'm thinking it goes into your qctp holder
One of the holders has " levin tool holder "scribed on it , the part that goes in the toolholder is 5/8 , my axa holds 1/2" tools . One holder has a collet in it . Question is do I need it and are 3c collets available and to what sizes ?.
Thanksimage.jpg
 
found this in a box of stuff I got from cl add , it uses 3c collets I'm thinking it goes into your qctp holder
One of the holders has " levin tool holder "scribed on it , the part that goes in the toolholder is 5/8 , my axa holds 1/2" tools . One holder has a collet in it . Question is do I need it and are 3c collets avairable and to what sizes ?.
ThanksView attachment 104616
3c collets are listed often on ebay. You could also use this for work holding rod stock in a milling vise.
 
Thanks , guess I'll hang on to them too.
 
You must have a tool fairy watching over you , these are very usefull in many ways. If you don't want them just send them to me I'll use them for you. Yupp I will
 
Back
Top