- Joined
- Nov 8, 2012
- Messages
- 783
Getting ready to install Y-axis scale for DRO on my SB 9A.
Only way I can see to do it is to drill and tap hole on cross-slide end above acme screw to attach sclae slide.
Plan on removing cross-slide to do this.
Anything else I should be careful about or do to drill and tap here ?
Haven't done drill & tap on cast before, don't want to damage cross-slide.
Only way I can see to do it is to drill and tap hole on cross-slide end above acme screw to attach sclae slide.
Plan on removing cross-slide to do this.
Anything else I should be careful about or do to drill and tap here ?
Haven't done drill & tap on cast before, don't want to damage cross-slide.