0
09kevin
Forum Guest
Register Today
I wanted to make some welding clamps for my welding table so I copied this design by Lazze
I need to make a ball turner for my lathe instead of machining spheres on the mill.
Next I machined the side plates, one half is threaded and the other half is counter bored fore the 5/16-18 bolt.
Next was to drill the 1/2 rod so I can insert and weld the 2 spherical ends on. I should have threaded the rod and ends incase I want to add longer or shorter rods in the future . This is my first time TIG welding so if you have any constructive criticism about the weld let me know.
I still need to finish machining a few more parts and will update when finished.
Kevin
I need to make a ball turner for my lathe instead of machining spheres on the mill.
Next I machined the side plates, one half is threaded and the other half is counter bored fore the 5/16-18 bolt.
Next was to drill the 1/2 rod so I can insert and weld the 2 spherical ends on. I should have threaded the rod and ends incase I want to add longer or shorter rods in the future . This is my first time TIG welding so if you have any constructive criticism about the weld let me know.
I still need to finish machining a few more parts and will update when finished.
Kevin