- Joined
- Dec 25, 2011
- Messages
- 10,477
OK. Several months ago, there was a thread in which someone discussed making a replacement key. I'm pretty sure that the specific key was in the QCGB, not the apron. But making the key would be the same process. Unfortunately, I haven't a clue as to the thread name or lathe model, except that I strongly doubt the title included the word "key". Of course, if you have a mill you could mill one out of bar or plate. But from the parts list description and the dimly remembered description in the old thread, it would appear that Clausing originally made it from key stock.
Did any of you specifically ask whomever you spoke with at Clausing whether or not they still had the drawing of the part? If you were speaking with Jolene, she would probably have looked without your asking. The others, probably not.
Did any of you specifically ask whomever you spoke with at Clausing whether or not they still had the drawing of the part? If you were speaking with Jolene, she would probably have looked without your asking. The others, probably not.