Ahp Alphatig 200x

After welding some more 1/4" Aluminum I think I need to go to a heavier Torch. Been looking at getting a Wp-26 but I am not sure if it will fit the Super Flex cable for the 17.
What size fittings are on the WP-26 compared to the 17?
If not, where can I get the Super Flex cable for the 26 that will work on the AHP 1/2" Dinse?
Would I need to get a different Dinse connector for the 26?

You will need a cable and dinse connector that is specific to the 26 torch. CK makes a dinse connector with the quick disconnect for the gas. I have the version of that connector(CK SL2-35QD) that works with the CK9 torch and flex hose on my 2015 AHP Alphatig 200 and it is plug and play. (as an aside, the dinse connector that came with my welder is not removable from the hose) For the 26 torch, you will need the CK SL8-35QD connector. A quick search on Amazon shows that connector and the matching CK torch and superflex hose. The CK worldwide website has info about the hose fitting sizes for each torch series.

Thanks DSaul.
Whats the difference between the CK TL26 and CK CK26 ?

The TL is the Trim Line series which has a smaller handle. This video explains the difference

Thanks DSaul.

JR49 said:

I'm a big believer in the fact that "everybody makes mistakes", and when it's a company that sold you something, they should make it right. I bet, if you asked, they would even replace the gas cups that cracked when using the wrong gas that they gave you. Worth a try? Don't know if its even worth the bother as I don't tig, so have no idea how much the cups cost. Good luck with the new welder, JR49

Click to expand...

Very true statement about everyone making mistakes. One of my favorite examples is the Mercury flight of Scott Carpenter. Splashdown was something like 300 miles away from the target point. Turned out the NASA engineers forgot to account for the rotation of the earth (>1000 mph at the equator) during re-entry. Pretty sharp group of guys making a mistake.

Bruce

Wow. Gas labeled wrong. I hope that is very unusual!
I'm glad you got it working! At least it was and easy fix. I'm not sure if all your previous questions were answered. I use 4043 exclusively. It flows better. I have found that 2% ceriated works great on aluminum. Now I just use it for everything and it works fine on all steels.
Have fun.
Robert

Haven't seen any comments on the AlphaTig 200x for a bit so thought I'd chime in. I bought one a few weeks ago directly from AHP via Amazon. Amazon also proved to be a great source for some 2% Lanthinated Tungston electrodes, a selection of filler rod (4043 for aluminum, ER70S-2 for steel, and some silicon bronze to try my hand at tig brazing). Also ordered a WP9F torch and a selection of gas lens, tips and ceramic cups both stubby and standard. I must admit I'm by no means a pro welder by trade, but was really pleased with the performance and quality of the welder. I was able to produce fairly nice welds on both steel and aluminum. I'd suggest getting some gas lens's for the torch (actually any torch). I was able to lower the argon flow a bit and get better shielding. I've never tig brazed before and am finding it a bit of a challenge to keep from not applying too many amps & too much heat but I'm sure practice will fix that.

I'd highly recommend taking a look a the welding tips and trick web site for anyone interested, new or even a seasoned pro at tig welding. There were some specific settings and other information that were specifically for the AHP 200x that I found very helpful in zeroing in on the correct settings without having to do too much hit and miss testing. In my opinion it's a great welder for the $ especially for the home hobbyist welders out there. I haven't owned it long enough to comment on longevity, but I'll keep my fingers crossed and hope it serves me for years.

I'd really like to see a list/chart of settings for specific thickness, types of metals etc wtith different sizes of torches, electrodes, filler rod etc supplied by owners for this specific machine. Might prove to be worthwhile information for those who have one and learning the machine or have a need to weld something they don't normally.

Resurrecting an old thread here.

I just bought one of these AHP Alpha TIG 200X machines off CL. It was slightly used (bought new in June 2016) but in like new condition. I've had a MIG for many years, but wanted a TIG for delicate stuff and aluminum. I'm reading up on TIG and watching videos. Looking for tips and suggestions from those who have the same welder.
Thanks Steve

The learning curve for TIG isn't to bad if you welded a bit. Same general principal once you get the settings, power and rod feeding down. I added a smaller WP-9 torch head for thinner metals which is fun (you can practice welding razor blades together) but other than that, I think just playing with all the settings and testing them and practice making beads, beads and more beads and you'll get more proficient. If you haven't seen them already there are a couple of folks who have produced some information and good youtube vids with hints and tips specifically for using the AHP 200x.