Horizontal With Vertical Head Overarm

drom68

Active User
Registered
Joined
Nov 13, 2013
Messages
128
So... I found this classic Cinci horizontal. Thought it would be cool to have next to the Tool Master I plan on getting. Needs some serious clean up and maybe a coat of paint. Or maybe I am just banging my head against old iron.00y0y_20uxKOC3y6A_600x450.jpg
 
I think there is a seven step program for that. (Shh, don't tell anyone...)
 
Oh baby!

Sometimes this site is like watching those sites you don't want anyone to know you go to.

I think we need a rating system. I'd say that was XXX.

Or, as in Tool and perhaps more appropriate - TTT
 
Great old machine.
I bet it would clean up great!

Nice find.
-brino
 
Here is a 7 step program for this mill
1. Buy
2. Move to shop
3. Locate in shop/find the room
4. Power the mill
5. Change all lubricants
6. Clean all machined surfaces
7. Use
 
Bet it's going to be a 24 step program on that one , but it'll be a nice and cured when done
 
if you don't get it, i'd consider driving across country to get it!
that's a cool mill!
 
120% Get it, as long as it works. Take it from me, they are a blast to own & make chips on.
 
Back
Top