Welding Machine For Under $100.00 With Shipping

Note the best setting a have found that does not trip the house breaker is
Max 1 note my house voltage is 122 volts and the voltage on the welder is 110 volt
The OC voltage at this setting is 36 volts

The OC voltages at 122 volts is
MIN 1 = 30 volts
MIN 2 = 33 volts
Max 1 = 36 volts
Max 2 = 40 volts


Calculate for other voltages for OC voltage

Input voltage= 115.0

Min 1 28.3
Min 2 31.1
Max 1 33.9
Max 2 37.7

Input voltage= 120.0

Min 1 29.5
Min 2 32.5
Max 1 35.4
Max 2 39.3

Input voltage= 125.0

Min 1 30.7
Min 2 33.8
Max 1 36.9
Max 2 41.0

Hope this help some one

Dave

100_0521.JPG
 
Last edited:
I have upload a copy of the Manual

Page 11 and 12 have additional information on duty cycle and voltagethumbup.gif
 

Attachments

  • FDS Wolf MIG 130 Manual 1.pdf
    4 MB · Views: 10
thank you so much for the manual mine didnt come with one..... i really wish they would give a good settings chart for with machine works pretty good but hell to a spool of wire to get all setting worked out
 
Last edited:
I have found for 1/8 to 1/4 steel welding. A setting of 4 1/2 on wire speed and OCV 35 to 37 for voltage. works ever time with out flipping the breaker
Check your open circuit voltage (OCV). The OCV is the voltage measured across the terminals when not welding

You may not be able to use the highest setting do to your shop voltage
See the last page

Dave




thank you so much for the manual mine didnt come with one..... i really wish they would give a good settings chart for with machine works pretty good but hell to a spool of wire to get all setting worked out
 
Up date on manual
Add setting and 110 volt amp
 

Attachments

  • Wolf FDS Wolf MIG 130 Manual.pdf
    3.3 MB · Views: 1
The manual that came with the welder was for the UK using 220 volts.
I have email the MFG that there is a error on the manual for input volts and amps they will fix error some day.
The line input for circuit voltage 110 volt 20 amp. Note: The most of USA 120 volt [115 to 125 volts]
The pdf file has voltage error fixed

Dave

thank you so much for the manual mine didnt come with one..... i really wish they would give a good settings chart for with machine works pretty good but hell to a spool of wire to get all setting worked out
 
Back
Top