SIPP Machine Co 2 spindle drill press

Wierd Harold

Active User
Registered
Joined
Dec 12, 2011
Messages
132
I just got this from a place where my son works. OK, I don't actually "have" it yet . I have to figure how to get it home . Probably going to have to disassemble it where it sits and take it home in pieces .
Here are a couple of pics sent to me to see if I wanted it.
2954-A.jpg
IMAG1966 [1024x768].jpg
IMAG1967 [1024x768].jpg
IMAG1971 [1024x768].jpg

HWF
 
Very cool. I myself am in a 12 step program to stop acquiring old machinery. Fortunately, or unfortunately, the last step seems to be get it anyway. :) Cheers, Mike
 
00g0g_g8cwASur6XY_1200x900.jpg
00K0K_c5bpbnmYa5b_1200x900.jpg
00K0K_c5bpbnmYa5b_1200x900.jpg
00o0o_gEc0jCbDPBS_1200x900.jpg
There's a real beauty in craigslist that was used by savage arms an Allen if I remember gonna see if I saved a picture. Keeps saying unable to due to low memory . But I've got pictures it's cheap to $400.00 3 spindle set up to drill ream and tap with the tapping attachment . It needs to be saved like this one
 
Last edited:
Here are a few more pictures starting with how it looked when I first saw it and how much I had to take apart to get it home. It took 3 trips in my Pickup. It broke down fairly easy into 7 big parts and a few "small" pieces. I could just handle the 5 upper parts but the table and base had to be loaded with a fork lift.
By the way, it ran like a top when I powered it up. Very quiet and smooth.
IMG_20170128_103944325 [1024x768].jpg
IMG_20170128_135038385 [1024x768].jpg
IMG_20170130_111405005_HDR [1024x768].jpg
IMG_20170130_111426043_HDR [1024x768].jpg
IMG_20170130_151039467_HDR [1024x768].jpg
 
very sturdy machine Harold!
i look forward to the progression!
 
Jealous. So jealous.

Never is there anything like that around here. Never.

A SIPP?? I really am jealous.

Wrat
 
There's a real beauty in craigslist that was used by savage arms an Allen if I remember gonna see if I saved a picture. Keeps saying unable to due to low memory . But I've got pictures it's cheap to $400.00 3 spindle set up to drill ream and tap with the tapping attachment . It needs to be saved like this one
Thanks for the pictures. Very odd that that drill is the same color as all of my Atlas equipment. Must be a sign.:encourage:
 
Back
Top