Results 1 to 20 of 20

Thread: Index of Tubal Cain (MrPete222) videos

  1. #1
    Titanium Nels's Avatar
    Join Date
    Sep 2010
    City
    Queens
    State
    New York
    Country
    United States
    Posts
    5,245
    Tickets
    0
    Post Thanks / Like
    Chats
    160

    Index of Tubal Cain (MrPete222) videos

    Pete222 (Lyle Peterson aka TUBAL CAIN) was kind enough to send me this list of his YouTube videos, which I am updating.

    MACHINE SHOP TIPS
    MACHINE SHOP TIPS #1 Taps http://www.youtube.com/watch?v=q7UvwyLSdsM
    MACHINE SHOP TIPS #2 Tapping http://www.youtube.com/watch?v=KILXW...eature=related
    MACHINE SHOP TIPS #3 Tapping http://www.youtube.com/watch?v=JTEra...eature=related
    MACHINE SHOP TIPS #4 Dies/Threading http://www.youtube.com/watch?v=E68dY...eature=related
    MACHINE SHOP TIPS #5 Dies/Threading http://www.youtube.com/watch?v=zGczZ...eature=related
    MACHINE SHOP TIPS #6 Dies/Threading http://www.youtube.com/watch?v=bZv_5...eature=related
    MACHINE SHOP TIPS #7 Cutting Pipe Threads http://www.youtube.com/watch?v=wRqLK...eature=related
    MACHINE SHOP TIPS #8 Types of Threads part A http://www.youtube.com/watch?v=UcPa0...eature=related
    MACHINE SHOP TIPS #9 Types of Threads part B http://www.youtube.com/watch?v=hrxIa...eature=related
    MACHINE SHOP TIPS #10 Identifying Bolt Threads http://www.youtube.com/watch?v=R4vRw...eature=related
    MACHINE SHOP TIPS #11 Drilling Crossholes http://www.youtube.com/watch?v=cBYQm...eature=related
    MACHINE SHOP TIPS #12 Thread Repair (male) http://www.youtube.com/watch?v=8ZP9m...eature=related
    MACHINE SHOP TIPS #13 BRIDGEPORT MILL Parts (A) http://www.youtube.com/watch?v=YbpES...eature=related
    MACHINE SHOP TIPS #14 BRIDGEPORT MILL Parts (B) http://www.youtube.com/watch?v=7oB7B...eature=related
    MACHINE SHOP TIPS #15 Bridgeport Mill TRAMMING with SPINDLE SQUARE http://www.youtube.com/watch?v=qGdpt...eature=related
    MACHINE SHOP TIPS #16 Clausing Lathe LH threading http://www.youtube.com/watch?v=FRa5A...eature=related
    MACHINE SHOP TIPS #17 Threading to Shoulder http://www.youtube.com/watch?v=w2eWq...eature=related
    MACHINE SHOP TIPS #18 Musing on Lathe Threading http://www.youtube.com/watch?v=1IqN0...eature=related
    MACHINE SHOP TIPS #19 Sine Bar part 1 http://www.youtube.com/watch?v=ojjdR...eature=related
    MACHINE SHOP TIPS #20 Sine Bar (with SPINDLE SQUARE) part 2 http://www.youtube.com/watch?v=RMmSs...eature=related
    MACHINE SHOP TIPS #21 Micrometers Part 1 http://www.youtube.com/watch?v=5Eyk5KmJpno
    MACHINE SHOP TIPS #22 Micrometer Quiz Part 2 http://www.youtube.com/watch?v=gKwzw...eature=related
    MACHINE SHOP TIPS #23 Internal Threading on the Lathe http://www.youtube.com/watch?v=olC9x...eature=related
    MACHINE SHOP TIPS #24 Acme Threading Part 1 http://www.youtube.com/watch?v=pxmHs...eature=related
    MACHINE SHOP TIPS #25 Acme Threading Part 2 http://www.youtube.com/watch?v=dhec5...eature=related
    MACHINE SHOP TIPS #26 Transferring Holes Part 1 http://www.youtube.com/watch?v=vMHM1...eature=related
    MACHINE SHOP TIPS #27 Transferring Holes Part 2 http://www.youtube.com/watch?v=u7kkvWYIfTA
    MACHINE SHOP TIPS #28 Hardinge Dividing Head Part 1 http://www.youtube.com/watch?v=pIg8I...eature=related
    MACHINE SHOP TIPS #29 Hardinge Dividing Head Part 2 http://www.youtube.com/watch?v=MXV7eV_WNEI
    MACHINE SHOP TIPS #30 Facing on the Atlas Lathe Part 1 http://www.youtube.com/watch?v=fTxHz...eature=related
    MACHINE SHOP TIPS #31 Facing on the Atlas Lathe Part 2 http://www.youtube.com/watch?v=McX3m...eature=related
    MACHINE SHOP TIPS #32 Turning to Dia. on the Atlas Lathe Part 1 http://www.youtube.com/watch?v=n4Utl...eature=related
    MACHINE SHOP TIPS #33 Turning to Dia. on the Atlas Lathe Part 2 http://www.youtube.com/watch?v=YkOHu...eature=related
    MACHINE SHOP TIPS #34 Turning to a Shoulder on Lathe http://www.youtube.com/watch?v=_yBSZ...eature=related
    MACHINE SHOP TIPS #35 Part 1 Parting on the Lathe http://www.youtube.com/watch?v=82LtU...eature=related
    MACHINE SHOP TIPS #36 Part 2 Parting on the Lathe http://www.youtube.com/watch?v=w0N6K...eature=related
    MACHINE SHOP TIPS #37 Part 3 Parting on the Lathe http://www.youtube.com/watch?v=PgS5G...eature=related
    MACHINE SHOP TIPS #38 Flame Cutting Straight Part 1 http://www.youtube.com/watch?v=7YBTQ...eature=related
    MACHINE SHOP TIPS #39 Flame Cutting Circles Part 2 http://www.youtube.com/watch?v=CIGVg...eature=related
    Machine Shop Tips #40 Part 1 Horizontal Bandsaw http://www.youtube.com/watch?v=fMVzz...eature=related
    Machine Shop Tips #41 Part 2 Horizontal Bandsaw http://www.youtube.com/watch?v=CvJbOVt1qqI
    Machine Shop Tips #42 Part 3 Horizontal Bandsaw http://www.youtube.com/watch?v=4FNBj...eature=related
    Machine Shop Tips #43 Part 4 Vertical Bandsaw http://www.youtube.com/watch?v=yvxOy...eature=related
    Machine Shop Tips #44 Part 5 Vertical Bandsaw http://www.youtube.com/watch?v=tRgxX...eature=related
    Machine Shop Tips #45 Part 6 Bandsaw Blades http://www.youtube.com/watch?v=YjxfY...eature=related
    MACHINE SHOP TIPS #46 Lathe Project BEARING Pt 1 http://www.youtube.com/watch?v=zj5Mz...eature=related
    MACHINE SHOP TIPS #47 Lathe Project BEARING Pt 2 http://www.youtube.com/watch?v=SISnF...eature=related
    MACHINE SHOP TIPS #48 Lathe Project BEARING Pt 3 http://www.youtube.com/watch?v=o_Ptf...eature=related
    MACHINE SHOP TIPS #49 Lathe Project Plumb Bob Pt 1of 3 http://www.youtube.com/watch?v=WP_ZR...eature=related
    MACHINE SHOP TIPS #50 Lathe Project Plumb Bob Pt 2 of 3 http://www.youtube.com/watch?v=S6wMY...eature=related
    MACHINE SHOP TIPS #51 Lathe Project Plumb Bob Pt 3 of 3 http://www.youtube.com/watch?v=QAj4o...eature=related
    MACHINE SHOP TIPS #52 Buying a Lathe Pt 1 of 3 http://www.youtube.com/watch?v=1MqYO...eature=related
    MACHINE SHOP TIPS #53 Buying a Lathe Pt 2 of 3 http://www.youtube.com/watch?v=nYni5...eature=related
    MACHINE SHOP TIPS #54 Buying a Lathe Pt 3 of 3 http://www.youtube.com/watch?v=lCv1x...eature=related
    MACHINE SHOP TIPS #55 Hole Layout Pt 1 of 2 http://www.youtube.com/watch?v=t6evp...eature=related
    MACHINE SHOP TIPS #56 Hole Layout Pt 2 of 2 http://www.youtube.com/watch?v=Mv0Q6...eature=related
    MACHINE SHOP TIPS #57 Bridgeport Mill DRO part 1 http://www.youtube.com/watch?v=5-rWO...eature=related
    MACHINE SHOP TIPS #58 Bridgeport Mill DRO part 2 http://www.youtube.com/watch?v=633tU...eature=related
    MACHINE SHOP TIPS #59 Bridgeport Mill Workholding Part 1 of 2 http://www.youtube.com/watch?v=KLqnN...eature=related
    MACHINE SHOP TIPS #60 Bridgeport Mill Workholding Part 2 of 2 http://www.youtube.com/watch?v=IVDZZ...eature=related
    MACHINE SHOP TIPS #61 Atlas Lathe Gibs Part 1 of 2 http://www.youtube.com/watch?v=mRp1Q...eature=related
    MACHINE SHOP TIPS #62 Atlas Lathe Gibs Part 2 of 2 http://www.youtube.com/watch?v=iaj3E...eature=related
    MACHINE SHOP TIPS #63 Clausing Lathe Gibs Pt 1 of 2 http://www.youtube.com/watch?v=5OcQd...eature=related
    MACHINE SHOP TIPS #64 Clausing Lathe Gibs Pt 2 of 2 http://www.youtube.com/watch?v=w6ZnC...0&feature=plcp
    MACHINE SHOP TIPS #65 Lathe Project Pulley Part 1 of 3 http://www.youtube.com/watch?v=pz_3Z...eature=related
    MACHINE SHOP TIPS #66 Lathe Project Pulley Part 2 of 3 http://www.youtube.com/watch?v=dYG8p...eature=related
    MACHINE SHOP TIPS #67 Lathe Project Pulley Part 3 of 3 http://www.youtube.com/watch?v=Xmt9W...eature=related
    MACHINE SHOP TIPS #68 Atlas Milling Attachment Part 1 of 3 http://www.youtube.com/watch?v=vVUK-...eature=related
    MACHINE SHOP TIPS #69 Atlas Milling Attachment Part 2 of 3 http://www.youtube.com/watch?v=bUmBz...eature=related
    MACHINE SHOP TIPS #70 Atlas Lathe Attachment Part 3 of 3 http://www.youtube.com/watch?v=Boov7...eature=related
    MACHINE SHOP TIPS #71 Atlas Lathe Taper Turning Part 1 of 2 http://www.youtube.com/watch?v=xTSmy...2&feature=plcp
    MACHINE SHOP TIPS #72 Atlas Lathe Taper Turning Part 2 of 2 http://www.youtube.com/watch?v=OmDvC...1&feature=plcp

    FOUNDRY VIDEOS CASTING COREMAKING FOUNDRY & PATTERNMAKING
    FOUNDRY CASTING Making a Sand Mold part 1 http://www.youtube.com/watch?v=dZGq1zCl4yM
    FOUNDRY CASTING Making a Sand Mold part 2 http://www.youtube.com/watch?v=QFLAr...eature=related
    FOUNDRY CASTING Molding with a Split Pattern part 3 http://www.youtube.com/watch?v=wG9Jz...eature=related
    FOUNDRY WORK Melting & Pouring part 4 http://www.youtube.com/watch?v=SVebl...feature=relate
    FOUNDRY WORK Mold Casting Shakeout part 5 http://www.youtube.com/watch?v=TekdQ...eature=related
    FOUNDRY WORK molding irregular parting line Part 6 video A http://www.youtube.com/watch?v=yosykQ-o994
    FOUNDRY WORK casting irregular line parting Part 6 video B http://www.youtube.com/watch?v=N8DGk...eature=related
    FOUNDRY PATTERN MAKING part 1 Steam Engine http://www.youtube.com/watch?v=h-c4_...eature=related
    FOUNDRY PATTERN MAKING part 2 Steam Engine metal casting http://www.youtube.com/watch?v=dKaM9qtcwr8
    FOUNDRY PATTERN MAKING part 3 Steam Engine metal casting http://www.youtube.com/watch?v=SQt2R...eature=related
    FOUNDRY PATTERN MAKING part 4 Steam Engine metal casting http://www.youtube.com/watch?v=khEvh...eature=related
    FOUNDRY PATTERN MAKING part 5 Steam Engine metal casting http://www.youtube.com/watch?v=8tqDL...eature=related
    FOUNDRY PATTERN MAKING part 6 Steam Engine cores http://www.youtube.com/watch?v=OedpF...eature=related

    MACHINE SHOP VIDEOS
    BRIDGEPORT MILL Tramming or Indicating the Head to Zero http://www.youtube.com/watch?v=JfANyiS8Hs4
    BRIDGEPORT MILL indicating the vise http://www.youtube.com/watch?v=TGmaIllVA9c
    TOOL BIT GRINDING #1 South Bend Atlas Lathe http://www.youtube.com/watch?v=hrDr4rYLiAk
    TOOL BIT GRINDING #2 South Bend Clausing logan Lathe http://www.youtube.com/watch?v=dRyqI...eature=related
    TOOL BIT GRINDING #3 South Bend Clausing logan Lathe http://www.youtube.com/watch?v=HTQ46...eature=related
    LATHE TOOL BIT GRINDING #4 South Bend Clausing logan http://www.youtube.com/watch?v=rZbr7Sh8jQw
    THREADING on the CLAUSING LATHE south bend part 1 http://www.youtube.com/watch?v=9y0Mm...eature=related
    THREADING on the CLAUSING LATHE atlas logan part 2 http://www.youtube.com/watch?v=5-bTf...eature=related
    MORSE TAPERS on Atlas & Clausing Lathes http://www.youtube.com/watch?v=JHNdrl7KKNc
    South Bend & Atlas LATHE TOOL HOLDERS http://www.youtube.com/watch?v=v2M-FW4-bGo
    Three Jaw Chucks on Atlas Clausing Hardinge Lathes part 1 http://www.youtube.com/watch?v=QNchOUh6a2w
    Three Jaw Chucks on Logan Clausing Hardinge Lathes part 2 http://www.youtube.com/watch?v=-u_CX...eature=related
    SCREW BACKLASH on Atlas Clausing Lathe http://www.youtube.com/watch?v=Tnl_tWMGN3E
    USING THE EDGEFINDER ON THE BRIDGEPORT MILL http://www.youtube.com/watch?v=CXMl7KyH8yc
    USING A WIGGLER on the BRIDGEPORT MILL http://www.youtube.com/watch?v=ZTEJ0...eature=related
    CUTTING A WOODRUFF KEYWAY on the BRIDGEPORT MILL http://www.youtube.com/watch?v=F_on-Af-0IM
    CUTTING A STRAIGHT KEYWAY with BRIDGEPORT MILL http://www.youtube.com/watch?v=5Pead...eature=related
    BROACHING A KEYWAY IN A PULLEY http://www.youtube.com/watch?v=8tAz5...eature=related
    TAILSTOCK CENTERS on South Bend Clausing Atlas LATHES http://www.youtube.com/watch?v=yvVYvoSr8m0
    TAILSTOCK CHUCKS for the Atlas Clausing South Bend Lathes http://www.youtube.com/watch?v=fgf8JM2CJXY
    TAILSTOCK ALIGNMENT on Clausing Atlas South Bend Lathes Part 1 http://www.youtube.com/watch?v=QADD2...eature=related
    TAILSTOCK ALIGNMENT on LOGAN HARDINGE South Bend Lathes Part 2 http://www.youtube.com/watch?v=1EZh8...eature=related
    THREADING WITH A PROCUNIER TAPPING HEAD http://www.youtube.com/watch?v=gtYzh...eature=related
    Bridgeport Mill part1 Indicating a Hole prior to boring http://www.youtube.com/watch?v=VY2cr...eature=related
    PARTS OF THE CLAUSING METAL LATHE http://www.youtube.com/watch?v=kYaWx-f5tcI
    BORING ON THE BRIDGEPORT MILL part 2 Criterion Head http://www.youtube.com/watch?v=mHna6...eature=related
    BORING ON THE BRIDGEPORT MILL part 3 Criterion Head http://www.youtube.com/watch?v=Uhe4E...eature=related
    THE BRIDGEPORT MILL part 4 Drilling a Bolt Circle http://www.youtube.com/watch?v=EvJa6hD3SrM
    THREADING Big Holes WITH AN ENCO TAPPING HEAD http://www.youtube.com/watch?v=bjr9-TNKvQ4
    THE USE & CARE OF DRILL BITS part 1 of 3 http://www.youtube.com/watch?v=hJItj_ISurY
    THE USE & CARE OF DRILL BITS part 2 of 3 http://www.youtube.com/watch?v=rUMTJ...eature=related
    THE USE & CARE OF DRILL BITS part 3 of 3 Sharpening http://www.youtube.com/watch?v=cqn2V...eature=related
    SPLICING A LEATHER SOUTH BEND LATHE BELT http://www.youtube.com/watch?v=QRvpi_umpro
    Parts & Operation of the LOGAN LATHE http://www.youtube.com/watch?v=yminOBsjDqg
    TURNING A TAPER ON THE LOGAN LATHE http://www.youtube.com/watch?v=OkqCdesrDwI
    THE USE & CARE OF REAMERS Part 1 http://www.youtube.com/watch?v=XEltyxuYUeU
    THE USE & CARE OF REAMERS Part 2 http://www.youtube.com/watch?v=CrOej...eature=related
    THE USE & CARE OF REAMERS Part 3 http://www.youtube.com/watch?v=kV3T3...eature=related

    STEAM & STIRLING ENGINES
    SOLENOID magnet motor like steam engine http://www.youtube.com/watch?v=3WzQ0mO5bC8
    STIRLING HOT AIR ENGINE #1 http://www.youtube.com/watch?v=zCrnAdahLw0
    STEAM ENGINE Locomotive teaching aid demo http://www.youtube.com/watch?v=dgQn3wiDqeE
    ELECTRO MAGNET MOTOR MESCO Avery patent http://www.youtube.com/watch?v=lYZAP...eature=related
    Hot Air STIRLING ENGINE #2 scotch yoke http://www.youtube.com/watch?v=pc9PhKKzynI
    ROBINSON HOT AIR stirling ENGINE http://www.youtube.com/watch?v=N0Yjadsc31Y
    WOBBLER STEAM ENGINE OVERHEAD CRANK http://www.youtube.com/watch?v=g3BtDnfugBc
    ELECTRO MAGNET COIL ENGINE (motor) #3 http://www.youtube.com/watch?v=VBRrz...eature=related
    STIRLING HOT AIR ENGINE runs on SNOW http://www.youtube.com/watch?v=b4Xy9...eature=related
    DOUBLE SOLENOID Electric ENGINE Motor http://www.youtube.com/watch?v=4o-y9...eature=related
    OVER & UNDER STIRLING ENGINE hot air http://www.youtube.com/watch?v=kR6pBZLGyNs
    STUART #9 Steam Engine running w/governor http://www.youtube.com/watch?v=Bg9XLWbWt70
    STEAM ENGINE 2 cylinder http://www.youtube.com/watch?v=AmNsG_iSuFI
    STEAM BALL ENGINE Aeolipile HERO of ALEXANDRIA http://www.youtube.com/watch?v=pedClpGfy10
    STIRLING HOT AIR ENGINE water cooled http://www.youtube.com/watch?v=q5OZCgSzr6E
    Principles of STIRLING HOT AIR ENGINES http://www.youtube.com/watch?v=DkfXd8634WY
    HIT & MISS GAS ENGINE McCormick-Deering Part 1 http://www.youtube.com/watch?v=qusgqTk9ylo
    SOLENOID MAGNET ENGINE electric MOTOR http://www.youtube.com/watch?v=jPOqLUY-6-I
    JENSEN MODEL TOY STEAM ENGINE under power http://www.youtube.com/watch?v=qTDhWN3wgFw
    CRETORS MODEL POPCORN WAGON STEAM ENGINE http://www.youtube.com/watch?v=My7Ilcb0sGA
    ELMER'S ENGINE'S #1 steam MODEL 2 cyl http://www.youtube.com/watch?v=2bKpS...eature=related
    ELMER'S ENGINES #2 steam ring gear http://www.youtube.com/watch?v=G1uoV...eature=related

    BUILDING A MODEL STEAM ENGINE
    BUILDING A MODEL STEAM ENGINE part 1 http://www.youtube.com/watch?v=B1t24sxjdZU
    BUILDING A MODEL STEAM ENGINE part 2 http://www.youtube.com/watch?v=t4jAJkq41xM&feature=related
    BUILDING A MODEL STEAM ENGINE part 3 http://www.youtube.com/watch?v=tyit***7ICQ
    BUILDING A MODEL STEAM ENGINE part 4 http://www.youtube.com/watch?v=bzKi4g7jD6I
    BUILDING A MODEL STEAM ENGINE part 5 http://www.youtube.com/watch?v=ielJnyHh-Iw
    BUILDING A MODEL STEAM ENGINE part 6 http://www.youtube.com/watch?v=Lwsxc...eature=related
    BUILDING A MODEL STEAM ENGINE part 7 http://www.youtube.com/watch?v=hrKr7...eature=related
    BUILDING A MODEL STEAM ENGINE part 8 http://www.youtube.com/watch?v=z7SNx...eature=related
    BUILDING A MODEL STEAM ENGINE part 9 http://www.youtube.com/watch?v=eUr4W...eature=related
    BUILDING A MODEL STEAM ENGINE part 10 http://www.youtube.com/watch?v=YhHn7...eature=related
    Last edited by Nels; 02-07-12 at 07:29 PM.

  2. #2
    Tungsten Carbide
    Join Date
    Nov 2011
    City
    Murfreesboro 30mi. south of Nashville
    State
    Tennessee
    Country
    United States
    Posts
    1,619
    Tickets
    0
    Post Thanks / Like
    Chats
    0
    OzzModz Classifieds
    8
    Thanks Thumbs, that sure makes it easier to find/watch what your looking for. That guy rocks. I subscribed to his channel a while back.

  3. #3
    Moderator irishwoodsman's Avatar
    Join Date
    Nov 2011
    City
    stlouis
    State
    Missouri
    Country
    United States
    Posts
    1,049
    Tickets
    0
    Post Thanks / Like
    Chats
    3
    thanks mr Thumbs, them are excellent vids

  4. #4
    Cast Iron bvd1940's Avatar
    Join Date
    Oct 2011
    City
    Blackfoot
    State
    Idaho
    Country
    United States
    Posts
    519
    Tickets
    0
    Post Thanks / Like
    Chats
    0
    Thanks Nelson, good addition
    Bill in SE Idaho, Given enough incentive and proper motivation anything can be fixed

  5. #5
    Tool Steel pdentrem's Avatar
    Join Date
    Jan 2011
    City
    Niagara Region South
    State
    Ontario
    Country
    Canada
    Posts
    1,300
    Tickets
    0
    Post Thanks / Like
    Chats
    2
    The list is IMPRESSIVE!
    Never enough toys is bad but too much government is worst!

  6. #6
    Brass
    Join Date
    Dec 2011
    City
    Cape Cod
    State
    Massachusetts
    Country
    United States
    Posts
    146
    Tickets
    0
    Post Thanks / Like
    Chats
    0
    Any one video would be impressive.

  7. #7
    Brass
    Join Date
    Dec 2011
    City
    Leakey
    State
    Texas
    Country
    United States
    Posts
    142
    Tickets
    0
    Post Thanks / Like
    Chats
    0
    Very nice, Thank you Nelson, I like his video's, he makes them so us dumb ones can understand them.

  8. #8
    Tungsten Carbide Old Iron's Avatar
    Join Date
    Sep 2010
    City
    Andalusia
    State
    Alabama
    Country
    United States
    Posts
    1,595
    Tickets
    0
    Post Thanks / Like
    Chats
    12
    Well I just down load them convert and burn to a lightscribe DVD so I can label them. In hope one of my grandsons will find them useful.

    A man can dream can't he?

    Paul
    My Machines
    K & T Milwaukee Vertical & Horizontal, 12" Hendy Shaper, 13" LeBlond Lathe,
    13" South bend Lathe, 20 X 60 ATW Lathe, Universal Brown & Sharpe Horizontal
    With Vertical Head, Jones & Shipman Surface Grinder, Milwaukee Die Filer,
    Camel Back Drill press And others.

  9. #9
    Plastic
    Join Date
    Jun 2013
    City
    Mount Vernon
    State
    Ohio
    Country
    United States
    Posts
    38
    Tickets
    0
    Post Thanks / Like
    Chats
    0

    Re: Index of Tubal Cain (MrPete222) videos

    I have been watching his videos almost non stop for the last two weeks. He is Awesome.

  10. #10
    Chips
    Join Date
    Feb 2013
    City
    Cleveland
    State
    Texas
    Country
    United States
    Posts
    15
    Tickets
    0
    Post Thanks / Like
    Chats
    0

    Re: Index of Tubal Cain (MrPete222) videos

    Thanks, I watch all that I can.

  11. #11
    Aluminum
    Join Date
    Aug 2011
    Posts
    84
    Tickets
    0
    Post Thanks / Like
    Chats
    0

    Re: Index of Tubal Cain (MrPete222) videos

    Quote Originally Posted by Nelson View Post
    Pete222 (Lyle Peterson aka TUBAL CAIN) was kind enough to send me this list of his YouTube videos...
    Great resource! Maybe some day I'll be in a position to buy his lathe series as an expression of my appreciation for his valuable contributions.

    Ken

  12. #12
    Bronze
    Join Date
    Nov 2012
    City
    Hvittingfoss
    State
    Outside US / Canada
    Country
    Norway
    Posts
    330
    Tickets
    0
    Post Thanks / Like
    Chats
    4

    Re: Index of Tubal Cain (MrPete222) videos

    Thanks Nelson. It's great that there is an index to follow these. He is an excellent resource and has an excellent way of teaching machining.

    Paul.

  13. #13
    Plastic
    Join Date
    Jul 2013
    City
    Margate, UK
    State
    Outside US / Canada
    Country
    England
    Posts
    21
    Tickets
    0
    Post Thanks / Like
    Chats
    0

    Re: Index of Tubal Cain (MrPete222) videos

    Thanks! I didn't realise there are so many....

  14. #14
    Aluminum
    Join Date
    Jan 2012
    City
    Gloucester,MA
    State
    Massachusetts
    Country
    United States
    Posts
    57
    Tickets
    0
    Post Thanks / Like
    Chats
    4

    Re: Index of Tubal Cain (MrPete222) videos

    Thank you, Nelson

  15. #15
    Chips
    Join Date
    Oct 2013
    City
    Medford
    State
    Oregon
    Country
    United States
    Posts
    3
    Tickets
    0
    Post Thanks / Like
    Chats
    0

    Re: Index of Tubal Cain (MrPete222) videos

    I've found that there is not a site updating the index so I made my own and will continue to update it. I did leave out the foundry and engine stuff as the shot tips are what I need. Anyone want a more current index it's at http://oregonjim.wordpress.com/2013/...n-video-index/

    If linking to it is some obscure violation of the forum's policy, I apologize and will delete it or leave it to a mod to do so.

  16. #16
    Plastic
    Join Date
    Sep 2013
    City
    North Pole
    State
    Alaska
    Country
    United States
    Posts
    24
    Tickets
    0
    Post Thanks / Like
    Chats
    0

    Re: Index of Tubal Cain (MrPete222) videos

    Quote Originally Posted by dvcprepper View Post
    I've found that there is not a site updating the index so I made my own and will continue to update it. I did leave out the foundry and engine stuff as the shot tips are what I need. Anyone want a more current index it's at http://oregonjim.wordpress.com/2013/...n-video-index/

    If linking to it is some obscure violation of the forum's policy, I apologize and will delete it or leave it to a mod to do so.
    Thank-you dvcprepper and Nelson. These are both VERY helpful.

    Bob J

  17. #17
    Brass JPigg55's Avatar
    Join Date
    Nov 2012
    City
    Smithfield
    State
    Illinois
    Country
    United States
    Posts
    159
    Tickets
    0
    Post Thanks / Like
    Chats
    0

    Re: Index of Tubal Cain (MrPete222) videos

    I love his videos as well. Wish I knew where he lives, I live in Illinois as well and would love to swing by to pick his brain if he were willing.

  18. #18
    Brass
    Join Date
    Sep 2013
    City
    Little Elm
    State
    Texas
    Country
    United States
    Posts
    158
    Tickets
    0
    Post Thanks / Like
    Chats
    0

    Re: Index of Tubal Cain (MrPete222) videos

    I have no idea how much I have learnt from MrPete222, the legend. I have been watching his videos for about three years and even when I re-watch them I learn something new. There are plenty of machine shop videos out there, but I find MrPete's are by far the most instructive. He is a teacher, though, so that kind of explains it ;-)

  19. #19
    Chips
    Join Date
    Feb 2013
    City
    Newcastle
    State
    Outside US / Canada
    Country
    UK
    Posts
    14
    Tickets
    0
    Post Thanks / Like
    Chats
    0

    Re: Index of Tubal Cain (MrPete222) videos

    Fantastic resource, thanks very much

  20. #20
    Chips
    Join Date
    Nov 2013
    City
    Lake Charles
    State
    Louisiana
    Country
    United States
    Posts
    14
    Tickets
    0
    Post Thanks / Like
    Chats
    0

    Re: Index of Tubal Cain (MrPete222) videos

    Very nice collection of very informative videos! I have been through the list one time completely and have watched several of them a few times. Every time I watch I learn something new. He has a way of explaining things that makes it easy to grasp the concept he is talking about. I wish he taught at my high school, I would have really enjoyed that class.

Similar Threads

  1. New Tubal Cain Vid on oils
    By Charley Davidson in forum MACHINE ACCESSORIES - QUESTIONS & ANSWERS
    Replies: 9
    Last Post: 03-13-13, 05:51 PM
  2. TOOL BIT GRINDING by Tubal Cain (MrPete222)
    By Nels in forum GENERAL MACHINING -- QUESTIONS & ANSWERS -- GET HELP FAST HERE!
    Replies: 8
    Last Post: 11-14-12, 10:05 PM
  3. Grinding Tool Bits Videos by Tubal Cain on Youtube
    By Nels in forum GENERAL MACHINING -- QUESTIONS & ANSWERS -- GET HELP FAST HERE!
    Replies: 3
    Last Post: 04-19-11, 07:21 PM
  4. Bridgeport Videos by Tubal Cain on YouTube...
    By Nels in forum BRIDGEPORT & B'PORT CLONES
    Replies: 0
    Last Post: 11-11-10, 08:01 PM
  5. Bridgeport Videos by Tubal Cain on YouTube...
    By Nels in forum OTHER BRANDS OF MACHINERY
    Replies: 0
    Last Post: 11-11-10, 08:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •