atlas milling machine

ist

I was just going to build a stand for my Atlas, a Covid stand. I ended up with a disassembled mill and still no stand. Don't you hate it when stuff like this happens. I am still in the make-over phase. I found a really nice welded table from U-line, just waiting on delivery. The restoration has...

I've been putting off another project for more than year and finally committed to getting started. In order to machine the base casting for the project, I decided to make some angle plate fixtures to bolt down to my Atlas Horizontal Milling Machine. The base casting needs to be flipped several...

Designed by Bryan Lund. Used on an Atlas MFC. The base is designed to fit on the full width of the milling machine table. The location of the keyway is noted in the print and the width of the keyway is 3/8" and fits the mill table t-slot. Use 3/4" long 5/16-18 flat head screws to secure the...

Rather than hijack one of the other Atlas Mill threads I decided it would be best to start my own. I have had this mill since late last summer but I haven't had much time to work on it. I had started dis-assembly a few months ago but today I finally removed the main casting from the floor...