- Joined
- Sep 24, 2014
- Messages
- 929
I have had my 7x12 HF mini lathe since December but have been working on my mill. I finally got the lathe out of the box and cleaned up this week. I am now ready to get it all adjusted and ready to go. I picked up a new spindle with a 4 inch collar that will accept a 4" chuck with no adapter required. I am also going to install new tapere roller bearing and a Machtach tachometer with the reader inside the head. Here are the parts:
I am planning to take pictures along the way which may help others who are considering this project. I will also put together a complet parts list and suppliers for each part. I have been researching this for the last few weeks. Any suggestions or comments would be greatly appreciated.
Brooks
I am planning to take pictures along the way which may help others who are considering this project. I will also put together a complet parts list and suppliers for each part. I have been researching this for the last few weeks. Any suggestions or comments would be greatly appreciated.
Brooks