Any Info On Speedway Drill Mill Dtmach34/03989

I purchased it from eBay. It's the: SHARS 4 x 4-1/8" Precision Mill Vise Anti-Jaw Lifting W/ Swivel Base CNC New

It's been a great vise. Way better than when I was trying to use a drill vise with the milling machine.

I plan on making a way cover and also adding a vertical feed stop with a DRO.

X/Y DROs will be added at a later date.
 
Last edited:
got a DTMACH 34-03989 speedway mill......
I bought the recommended draw bar for this mill to move it to 3/8x16 thread but the shaft is way to fat to fit. (the old metric one is about .33" dia)
PN 3019 3mtx3/8"-16,x3mil from littlemachineshop-dot-com
did i order the wrong part? if so please set me straight, if not will this turn down easy? I have a shure-line lathe this is a MT2 mill, checked online and measured the ends.
 
Got this beast up and running, Although its a budget mill it seems to work pretty good, got my projects competed to a more or less satisfactory condition, boy do I need some experience and or training.:confused:
 
Back
Top