Clausing Vert Mill pics/+ pics of SB 10L ready to move

razinman

Active User
Registered
Joined
Feb 23, 2013
Messages
152
Hi All
I said I would post some pics of the Clausing mill after I assembled it, most of it went fairly well .
The only thing that's still a mystery is the top retainer (#641-001)that seats on upper pulley of the spindle.
I press fitted all the parts, for some reason the gDSCN0452.JPG rove in the spindle did not reach the point where I could
install the retainer, I assume I will have to take the spindle apart and press fit it together again(not too soon
though).
I also included pics of my SB 10L, which I finished about 5-6 months ago, (waiting to sell my house and move), and then assemble that too.
Once again , thanks for all your help with the Clausing Mill !

Regards.......Raz

DSCN0455.JPG

DSCN0456.JPG

DSCN0457.JPG
 
Since you can't figure it out, I'll take it off your hands, you won't have to worry any more.
 
Hi Jeff,

Sure, which one would you like, LOL
The mill I took it apart/cleaned/painted approx. 3 months
The lathe " " " " " 9 months

Regards............Raz
 
Nice machines and nice photos, too, Raz. ;-) Glad you got it figured out...
Thanks Bob, When I get the SB together after I move( sooner than later) I'll post the pics. You can't tell by the pics since lathe is all sprawled out
on the floor.
I'll be coming your way, San Diego.
Regards...........Raz
 
Back
Top