Knurling Tool

One more design idea. Once I got used to it, I could do fine and medium knurls in less than 5/8" stock in one pass.DSC_25760001.JPGDSC_25770001.JPG

Knurls are easily interchangeable.

DSC_25760001.JPG DSC_25770001.JPG
 
Made from a Kant Twist clamp:

Kant-TwistKnurler_2.jpg

Necroposting this because I was just searching for DIY knurling tools and this is right along with what I was thinking about! Gerry, are you still using this and how's it working? Thanks.
 
Gerry R hasn't been seen since July 2014.

Maybe send him a PM and see if he answers..
 
Knurlers can put significant pressure on the cross lead screw. I think a design that would place the knurler directly on the cross slide and jack up from there to the workpiece would solve that. Base with a screw mechanism keyed to a slot on the cross. Align the part, put a turn on the screw for pressure and switch on the power feed.
 
Hi, I'm only a small new member working alone in my rabbit burrow, but I make a lot of knurling and sometimes constructing specific tools fot the Tripan system as on this page : http://www.lecollectionneur.ch/po-tripan/
On a website page I've put some documentation about the Quick system : http://www.lecollectionneur.ch/documentation-pdf/
My knurling wheels used in the compression system are coming from a closed production enterprise but with standard metric measures as 6mm. axis for example, if you want i can make a picture of the various profile and dimensions wheels I conserved in a small collection
 
...I make a lot of knurling and sometimes constructing specific tools fot the Tripan system as on this page : http://www.lecollectionneur.ch/po-tripan/

Okapi,
You made the knurls wheels?
Your work exceeds the O-Cool threshold!
Are you willing to tell us anything about how you make these?
If so, please do!
Wish I could afford to pay what you'd appropriately charge for those gorgeous knurls.

Daryl
MN
 
Back
Top