- Joined
- Mar 26, 2013
- Messages
- 78
Hey folks,
Thought I would post some pics of my machine shop area at work. This is seperate from the main fab shop where I am the supervisor. I have seen numerous posts about tooling storage and such so I figured I would show you all the solution I came up with. All of the cabinet componets come from Class C Distribution, a division of MSC, at no cost since they maintain our keepstock items. I made the base rolling frame and just bolted everything together. I also cut out all the drawer liners by hand so that when I open a drawer I will know if something is missing.
If y'all have any questions, please ask!
Chuck
Thought I would post some pics of my machine shop area at work. This is seperate from the main fab shop where I am the supervisor. I have seen numerous posts about tooling storage and such so I figured I would show you all the solution I came up with. All of the cabinet componets come from Class C Distribution, a division of MSC, at no cost since they maintain our keepstock items. I made the base rolling frame and just bolted everything together. I also cut out all the drawer liners by hand so that when I open a drawer I will know if something is missing.
If y'all have any questions, please ask!
Chuck