Thanks, Bill. Didn't get much accomolished today, other than leveling. Had an odd electrical gremlin that wasted a lot of time... couldn't get it to turn on at all after leveling. Finally attributed it to a pinched or loose wire behind the faceplate on the electronics box... when I loosened the left 2 screws it started. I took the faceplate off (and was reminded my hands are too dang big for tight spaces, like right agains the mill head), but couldn't find anything obvious, so made sure connections were seated properly and reinstalled. On/off seems fine now, guess we'll see over the next few days. Then, after cutting a couple pieces of steel for the tramming aids, I realized I'd ordered a clamping kit with the wrong size t-slot nuts. At least they're 3/8 bolts, so all I need to order are the nuts themselves. Frustrating, though!