Old School

[MattM]

You might be Old School if you ever shot a squirrel with a self made firecracker gun.

 

[Old Mud]

You might be Old School if you ever had an Old one lunger /Lathrop in your fishing boat.

 

[JerryK]

You might be old school if you chased the Ice truck

 

[Wreck™Wreck]

Old Schooling today.

1940's era Warner and Swasey turret lathe, 3 1/2" 1045 TGP steel rounds, had to drill 11/32" holes 9" deep and tap 1/8" NPT.
Used 4 drill chucks in the turret, jobber length drill, 14" long drill, countersink and pipe tap. Worked a charm 8 parts in 4 hours including part handling.

 

[JerryK]

You might be old school if you penciled programs

Challenge yourself by solving the problem with
no computer, just pencil , paper, and trigonometry table
No answers needed.

 

[Jimsehr]

I chased an ice wagon that was pulled by a horse. And boy did the driver get ******.

 

[MattM]

You might be old school if you penciled programs

Challenge yourself by solving the problem with
no computer, just pencil , paper, and trigonometry table
No answers needed.


View attachment 249363

Can i use my slide rule?

 

[Wreck™Wreck]

.517 X the rhombus / collateral angle in degrees Kelvin for metric units

This can not be solved in inch units as the rhombus declination is undefined.
I hope this helps.

 

[JerryK]

Don’t give up guys, there is a solution.
Someone will post it

 

[ACHiPo]

Sure looks like 0.500" in the X direction to me. No trig tables handy, but y=0.375+0.5*sin(0.5/0.625)?