- Joined
- Apr 23, 2011
- Messages
- 2,476
The one shot oiler for my mill has broken a couple of mounts, and the case and lid are both cracked and leak oil. The casting is just some cheap and nasty pot metal and beyond repair. All the innards are good and it still pumps oil but the reservoir is scrap.
Any suggestions for reusing the guts somehow, or hooking up a different method of oiling to the manifold that I have now.
Cheers Phil
Any suggestions for reusing the guts somehow, or hooking up a different method of oiling to the manifold that I have now.
Cheers Phil