A view of the bearing bracket (with bearings still installed there are 2)
At this point you can remove the feed screw if you have removed the handle/power feed on the right side of the unit.
The end of the feed screw.
Another view of the feed screw.
A view of the bearing bracket (with bearings still installed there are 2)
Remove the 4 cap head screws holding the bearing bracket in place.
A view of what you should have taken off by now in order of appearance. lol
Remove the three cap screws holding the bearing retainer.
expressline99

A view of the bearing bracket (with bearings still installed there are 2)

Media information

Album
Bridgeport Series 1 VS 2hp Tear down of the table and saddle
Added by
expressline99
Date added
View count
493
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/34 second(s)
ISO
400
Flash
Auto, did not fire
Filename
DSCN6007.JPG
File size
2.2 MB
Date taken
Sun, 06 August 2017 4:36 PM
Dimensions
3648px x 2736px

Share this media

Back
Top