At this point you have to wrestle the motor on and line up the keyway on the variable disk as you lower the motor in.
You can install the motor pulley access plate with the three screws here now. :)
Motor pulley access plate with socket head screws.
view of the motor shaft installed through the variable disk assembly Held in place with a snap ring.
At this point you have to wrestle the motor on and line up the keyway on the variable disk as you lower the motor in.
Bottom view of the variable disk with the spring still compressed via the long screws I installed.
The variable disk must be set in place inside the belt housing before installing the motor.
View of the installed fixed motor pulley.
expressline99

At this point you have to wrestle the motor on and line up the keyway on the variable disk as you lower the motor in.

This is a hard one. I had to do this alone standing on a ladder. So there aren't any pictures of me putting the motor on. Once you have the motor in place you install the snap ring.
Click to expand...

Media information

Album
Bridgeport Series 1 VS 2hp Motor Tear Down and Bearing replacement
Added by
expressline99
Date added
View count
736
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
DSCN5875.JPG
File size
47.2 KB
Dimensions
600px x 450px

Share this media

Back
Top