Going to need a pair of needle nose to hold the bushing during install.
Over lap the bushing like this and hold it with a pair of needle nose pliers while you insert it. Lip towards the center of the pulley.
Put half of the glue in the top all the way around. (Half in the bottom)Don't need it in the key way. Not needed in the center recess either.
Mix up the glue for one pulley at a time. Mix until it's a uniform color. You only have 3-5 minutes of working time on the glue! So hurry!
Going to need a pair of needle nose to hold the bushing during install.
You have to clean out all of the glue from the old install. Using a dremmel = good idea. Using a wire disk...poor mine didn't work.
Top View of motor pulley vari-disc with old key still installed.
Motor pulley vari-disc with old key still installed.
expressline99

Going to need a pair of needle nose to hold the bushing during install.

***Before you do anything else! DRY fit test the bushings! You do not want to find out you didn't clean enough when you are putting the bushings in! It will be too late. Also test fit the sleeves when testing the bushings. If they don't fit now...they won't fit with new glue in there!*******
Click to expand...

Media information

Album
Bridgeport Series 1 2hp variable speed, bushings being redone.
Added by
expressline99
Date added
View count
874
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/33 second(s)
ISO
400
Flash
Off, did not fire
Filename
DSCN5489.JPG
File size
2.2 MB
Date taken
Tue, 11 April 2017 7:06 PM
Dimensions
3648px x 2736px

Share this media

Back
Top