Now put the new drive belt on. Secure it with a zip tie to keep it on and out of the way.
There is where the set screw holds the pin in place...this faces out. Seems obvious but anyway. :)
Spindle brake handle with pin and set screw.
Showing Mounting Holes For Spindle Pulley Hub
Now put the new drive belt on. Secure it with a zip tie to keep it on and out of the way.
Lower view of the top spindle pulley hub bearing sitting directly on the snap ring.
A new bearing (6007 double sealed) should be installed on top of the spindle pulley hub. After installed.
A new bearing (6007 double sealed) should be installed on top of the spindle pulley hub.
expressline99

Now put the new drive belt on. Secure it with a zip tie to keep it on and out of the way.

The lower belt housing is now complete. Next up the upper belt housing. Getting close to the end of this head rebuild!
Click to expand...

Media information

Album
Bridgeport Series 1 VS 2hp belt housing tear down and rebuild
Added by
expressline99
Date added
View count
826
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
DSCN5596.JPG
File size
57.1 KB
Dimensions
600px x 450px

Share this media

Back
Top