Part numbers inside of the junction box cover.
Remount the high low switch with the two flat head screws it had...if you haven't lost them yet.
This is where you install the high speed low speed switch. Left side of the belt housing if you are looking at it from the front of the machine.
The installed junction box on the motor.
Part numbers inside of the junction box cover.
The junction box cover with screws.
These are the wire groupings for connecting your motor wiring to the high and low speed switch.
Mounting location on the motor for the junction box. It's three phase so it has 9 wires.
expressline99

Part numbers inside of the junction box cover.

Media information

Album
Bridgeport Series 1 VS 2hp Motor Tear Down and Bearing replacement
Added by
expressline99
Date added
View count
897
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/40 second(s)
ISO
400
Flash
Off, did not fire
Filename
DSCN5902.JPG
File size
2.2 MB
Date taken
Thu, 22 June 2017 9:26 PM
Dimensions
3648px x 2736px

Share this media

Back
Top