Time to install the spindle lock nut. Start screwing it on then mount it in the vise with soft jaws. This time bearings on the right side.
When you finish tightening the spindle lock nut stop where you can line up one of the tabs with a slot on the nut.
Get the spanner wrench! Tighten the nut down a couple of light taps with the dead blow. Don't over tighten or you will bind the bearings.
Mount the spindle in the vise (with soft jaws or covered in brass like mine.) Bearings on the right side this time.
Time to install the spindle lock nut. Start screwing it on then mount it in the vise with soft jaws. This time bearings on the right side.
Spindle lock washer install line up the tab with the keyway slot.
Spindle lock washer view 2. Showing tab.
Spindle lock washer view 1.
expressline99

Time to install the spindle lock nut. Start screwing it on then mount it in the vise with soft jaws. This time bearings on the right side.

Media information

Album
Bridgeport Series 1 VS 2hp Spindle rebuild & tear down
Added by
expressline99
Date added
View count
888
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/5.6
Focal length
6.3 mm
Exposure time
1/60 second(s)
ISO
200
Flash
Auto, fired
Filename
DSCN5249.JPG
File size
2.2 MB
Date taken
Thu, 30 March 2017 8:07 PM
Dimensions
3648px x 2736px

Share this media

Back
Top