Tools you will need for your spindle rebuild.
You will need to bend the tab back out of the way on the lock washer.
Mount the spindle in a vice...using brass/soft jaws. I have mine covered with brass sheets. Have the bearings on your left.
Closer view of tools needed....yeah I know extra picture but hey I took it.
Tools you will need for your spindle rebuild.
Spindle looking at the "output" end inside...collet end
Spindle looking at the "out put" end from the side.
spindle view looking at the lower set of bearings.
expressline99

Tools you will need for your spindle rebuild.

Dead blow hammer, pin punch, Hook spanner, Flat head screw driver. Also, not in the picture a set of hex keys to remove and install the collet set screws in the end that align the R8 collets as you insert them.
Click to expand...

Media information

Album
Bridgeport Series 1 VS 2hp Spindle rebuild & tear down
Added by
expressline99
Date added
View count
465
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/45 second(s)
ISO
200
Flash
On, fired
Filename
DSCN5135.JPG
File size
2.1 MB
Date taken
Thu, 23 March 2017 7:36 PM
Dimensions
3648px x 2736px

Share this media

Back
Top