2013 POTD Thread Archive

Made a spinner for a 3/8 drive ratchet out of a old gear. I will put some pics up soon.
 
Just finished this Circle Cutter for a modeling friend. Range is 1.5" - !2".

"Billy G"
 
This thread is awesome. Thanks guys. I can only hope to come half as close to the skill that you guys have.
 
A little Gun-kote work:

sandblasted parts:
ResizedImage_1379631009558.jpg

Gun-kote baked:
ResizedImage_1379631051177.jpg

Assembled:
ResizedImage_1379631150124.jpg

ResizedImage_1379631150124.jpg ResizedImage_1379631051177.jpg ResizedImage_1379631009558.jpg
 
This thread is awesome. Thanks guys. I can only hope to come half as close to the skill that you guys have.

pipehack,

stick with it trial and error have a lot to do with my learning.:thinking: But this group has saved me a lot of errors.
 
NOTHING, I watched ebay all day and I got it. A 1923 Ford touring yahoo !!!!!!!!!!! trailers already hooked up
 
Had to have a ( special tool) you know!!! The special tool that the shop owner has to buy that drives the cost up to fix your car. This car was a 2008 Ford fusion. The tool is for removing the lower ball joint. The tool can be bought for about $220.00. & would be a couple of days to ship. I made this one in a couple hours. I bought the .750x16 grade 8 threaded bolt at fastenal.
Phil

image.jpg image.jpg
 
Back
Top