- Joined
- Jun 30, 2015
- Messages
- 143
I know this seems incredibly basic but I can't figure out the answer what is the proper size that you're Metal rod has to be for the die you want to use.
You might say well if you're using a 1/4x 20 die, your rod should be a quarter-inch. But what if you are trying to match 10 x 24 or 6 x 32. Maybe it would be helpful if I understood what the 10 stands for in the 10 x 24 I know that 24 is the pitch. I do not mean to digress I just want to be able to make my own screws from the dies
Sent from my iPhone using Tapatalk
You might say well if you're using a 1/4x 20 die, your rod should be a quarter-inch. But what if you are trying to match 10 x 24 or 6 x 32. Maybe it would be helpful if I understood what the 10 stands for in the 10 x 24 I know that 24 is the pitch. I do not mean to digress I just want to be able to make my own screws from the dies
Sent from my iPhone using Tapatalk