- Joined
- Apr 9, 2016
- Messages
- 120
Hi y'all I'm a new guy that just got my first lathe (an old Sheldon) and you have to reach right over the chuck to hit the reversing switch to start the lathe. I have a table saw with a big red flap over the stop button that all you have to do is bump it and it kills the saw. Could I adapt one of these to my lathe in a good location and still keep the reversing switch in the original location? I also wondered about a foot switch? any ideas would be appreciated. I hope I didn't put this in the wrong forum. Thanks in advance. Thad