Mach3 Or Cambam Problem

That is very strange:cautious:

Yeah, it was a bit frustrating. I had a free day in the shop and ended up spending the entire day troubleshooting the mill. I'm up and running again after tweaking hot keys and homing direction. learned that changing the motor Dir affects other settings. Another "learning" experience I hope won't repeat itself.

Tom S.
 
All very strange. Have you tried running a program that worked before now that you have made changes to the motor direction? I just don't see how a g-code program could change any configuration settings in Mach3?
 
All very strange. Have you tried running a program that worked before now that you have made changes to the motor direction? I just don't see how a g-code program could change any configuration settings in Mach3?

No, I haven't tried a program that ran OK before this episode but will try tomorrow. I'm still baffled why the configuration changed. Makes no sense at all.

Tom S.
 
Weird stuff like that is part of the reason, after playing with Mach3 for about a month, I just sat down and wrote my own CNC software.
 
Back
Top