- Joined
- Nov 29, 2015
- Messages
- 439
I wonder why a couple of these ideas seem like the plate goes home with someone else? No one has said load it in their car YET. LOL
Sorry I didn't mentioned it but the plate is 24"x24"x3" it's not super heavy but enough I can't lift it alone. On the stand all four corners will each have a piece of angle iron that sticks up to keep the plate from sliding off and or protecting the corners? But I am wondering if that is even needed with this size of plate. I'll move back over to the support thread for that question. I don't want to weld corners on after placing the stone. Plus I have to paint first.
So it's wood stacks/rails/ or engine hoist. I would borrow one but I haven't had any mechanic friends for years now. I could probably attract a few people from Sacramento if I bought a bunch of beer and offered food. If they could get here before I drank it all. I do have a big bar I built downstairs with some pinball machines.
Thanks for the ideas folks. I'll have to ponder it out.
Sorry I didn't mentioned it but the plate is 24"x24"x3" it's not super heavy but enough I can't lift it alone. On the stand all four corners will each have a piece of angle iron that sticks up to keep the plate from sliding off and or protecting the corners? But I am wondering if that is even needed with this size of plate. I'll move back over to the support thread for that question. I don't want to weld corners on after placing the stone. Plus I have to paint first.
So it's wood stacks/rails/ or engine hoist. I would borrow one but I haven't had any mechanic friends for years now. I could probably attract a few people from Sacramento if I bought a bunch of beer and offered food. If they could get here before I drank it all. I do have a big bar I built downstairs with some pinball machines.
Thanks for the ideas folks. I'll have to ponder it out.