I am making progress on getting my 16" G & E shaper running and discovered that I am missing the feed chart that is supposed to be on the feed selector. I don't know if it makes a difference but I have a 8-speed machine from around 1943. Would anyone with a G & E post some photos of the band with the feed increments on it?
I really need to know where "0" (zero) is, first (out of focus) photo shows handle all the way to the right with detent arrow all the way on the left.
Close up of detent with handle in far right position, arrow is at the left (lower) location.
Here is the lever in the down/left position, putting the arrow/detent as far right as it can travel.
My assumption is that this last photo is showing the zero feed (0 feed) location. Notice the slight space between where the arrow and detent is and the rest of the equally spaced V's.
Anyone?
thanks,
Mike
I really need to know where "0" (zero) is, first (out of focus) photo shows handle all the way to the right with detent arrow all the way on the left.
Close up of detent with handle in far right position, arrow is at the left (lower) location.
Here is the lever in the down/left position, putting the arrow/detent as far right as it can travel.
My assumption is that this last photo is showing the zero feed (0 feed) location. Notice the slight space between where the arrow and detent is and the rest of the equally spaced V's.
Anyone?
thanks,
Mike