2018 Archive

Status
Not open for further replies.
That is very generous of you but i was just joking with you. No need to.

Well, turns out that's a good thing. I unloaded the box a while ago and started going through it. All the end mills with the wax on them were in one compartment of a drawer. I guess somebody decided they needed them worse than I do. I guess between the time I bought it and the time I loaded it, somebody pocketed a half-dozen new end mills.

I'm not happy about that, but there's still enough there that I came out alright. I haven't had that happen at an auction in years. Lesson learned...
 
Thats sad atleast they didnt take the instruments though and you got a nice kennedy box out of it so.
 
Well, turns out that's a good thing. I unloaded the box a while ago and started going through it. All the end mills with the wax on them were in one compartment of a drawer. I guess somebody decided they needed them worse than I do. I guess between the time I bought it and the time I loaded it, somebody pocketed a half-dozen new end mills.

I'm not happy about that, but there's still enough there that I came out alright. I haven't had that happen at an auction in years. Lesson learned...

There's a dirt bag around every corner.
 
Ok, so I actually bought this the other day, but brought it home today.:D

Big shout out to Bob Korves, Ulma Doctor, and Rex Walters for their help relocating the mill. I sure am lucky to have such good people close enough to help me out!
IMG_1024.JPGIMG_1026.JPGIMG_1027.JPGIMG_1030.JPGIMG_1033.JPG
 
IMG_2115.JPG
Hi hman, I started with the basic kit shown above and added a few extras. The dual port at the mill station, various valves and fittings and the gauge. I found I needed more mounting clips. It worked out well, used all but 10 feet.
 
I bought plane tickets . The wife and daughter are heading to Vegas tomorrow morning thru Friday to see a Reba McIntyre and Brooks and Dunn concert . The tickets were round trip , if otherwise , I would be buying more and MORE TOOLS ! :(;)
 
8foot vintage cast iron parallel.
No pics yet....
Supposedly flat and straight. Will see.
If not, I've got work to do.....
But, it's not work. It is more practice.

Daryl
MN
 
Status
Not open for further replies.
Back
Top