Morse taper drill bits...is there a market?

I bought some goodies from a guy yesterday and one thing I may go back for is a bucket of Morse taper drill bits. I have no idea at this point which taper and just from a quick look I think they were mostly larger sizes, probably from a local factory. Is there a market for these?
 
I could use them if you don't want them. I'm trying to fill in a set of MT3 drills. MT2 would work, too.
 
I am probably going back Saturday to rescue the drill bits, some horizontal cutters, some taps and some other miscellaneous items.
 
My Craftsman 12x36 lathe is MT2 with no tang slot. If I use a taper with a tang us there usually enough extra room in the receiving taper to accommodate the tang? I think so but not sure. Not sure of the taper on my vintage Craftsman drill press.
 
My Craftsman 12x36 lathe is MT2 with no tang slot. If I use a taper with a tang us there usually enough extra room in the receiving taper to accommodate the tang? I think so but not sure. Not sure of the taper on my vintage Craftsman drill press.
My lathe also does not have a socket for the tang. It still works, but the travel is reduced before the tool ejects.
 
Back
Top