Spindle Stop for DSM-59 Turrett Lathe

frankly2

H-M Supporter - Sustaining Member
H-M Platinum Supporter
Joined
Mar 27, 2017
Messages
194
A little some thing I made after seeing one in someones production shop. Not too unlikke the one I saw but made to fit my Hardinge DSM-59 spindle bore so I would have a posttive stop behind the 5-C collet closer. Works well for me. Here are pics of it......
Thought i would add pic of cad file.......
 

Attachments

  • Spindle Stop a.JPG
    Spindle Stop a.JPG
    950 KB · Views: 68
  • Spindle Stop b.JPG
    Spindle Stop b.JPG
    934 KB · Views: 70
  • Spindle Stop Pic.JPG
    Spindle Stop Pic.JPG
    968.4 KB · Views: 50
Last edited:
Nice job! Looks pretty much the same as my Yuasa spindle stop.
 
Nice work. Welcome!

I‘m curious about your DSM. Could you post photos on the Hardinge page?

Thanks,Evan
 
Nice job! Looks pretty much the same as my Yuasa spindle stop.
It just may be a copy, but I did the work from memory so it is not necessarily the same design. it is however one handy dead stop for my applications.
 
It just may be a copy, but I did the work from memory so it is not necessarily the same design. it is however one handy dead stop for my applications.

That's pretty good from working off memory! Yes slightly different, mine uses return springs but no matter, as long as it works is all that matters. :encourage:
 
That's pretty good from working off memory! Yes slightly different, mine uses return springs but no matter, as long as it works is all that matters. :encourage:
I intend making one more for my SB 9” which has a 11/16 spindle bore. That may be a little more difficult having to make it so much smaller !
 
I intend making one more for my SB 9” which has a 11/16 spindle bore. That may be a little more difficult having to make it so much smaller !

Owning one of these I can understand what you mean. That would be challenging but it would be awesome & cute to see one in that size. Don't think I've ever called a machining related tool cute before. Haha! But if you do make one, please do share your work!
 
A correction........ the spindle bore On my 9” SB model C is 3/4”

I'm also looking for a set of threading change gears for the C model SB, if any one knows where I can find them, if not I will be forced to make them myself.
 
Back
Top