I had found it also, wish it was yours.I found that pic on google
The major parts of it are indeed like an Enco of the period but slight differences. I have a ENCO made in 1992 and had been looking at them in the catalogs for at least 4 years prior. Enco did not have one with that large lever wheel on the front. Also, the Enco's have the fwd/stop/reverse switch in a small box next to the headstock still hooked to the rod. None of the Enco's were variable speed in this sizeGot it running today. I have used it to make a couple of parts. Still have not found any information on it.
Thanks for the information. Maybe I will run across a manual for a machine that is close to it sometime.The major parts of it are indeed like an Enco of the period but slight differences. I have a ENCO made in 1992 and had been looking at them in the catalogs for at least 4 years prior. Enco did not have one with that large lever wheel on the front. Also, the Enco's have the fwd/stop/reverse switch in a small box next to the headstock still hooked to the rod. None of the Enco's were variable speed in this size