- Joined
- Feb 24, 2018
- Messages
- 1,044
I had ordered the square and hexagon ER 32 collet blocks from LMS, with my current run of somewhat poor shipping luck, I was expecting 2 weeks. I already have the collet blocks in 5C, so I was not being held up on jobs. So 5 days after I ordered it, it arrived. I was surprise. They seem to be a quality piece with the HHIP logo, I was surprise by the heft, they weigh almost as much as the 5C blocks.
I much prefer the wrench/nut tightening vs the 5C ring that needed me to remove the collet block to change out work pieces. Hopefully they will work out, I’ve use the 5C versions quite a bit.
I much prefer the wrench/nut tightening vs the 5C ring that needed me to remove the collet block to change out work pieces. Hopefully they will work out, I’ve use the 5C versions quite a bit.
Last edited: