You guys are getting out of hand.

[KevinM]

Got a 6 jaw chuck yet? Your shop will be one step closer to looking like Tony Stark's Shop.

I would love to have one but backing plates for my weird spindle (type C) are difficult to find. I found them available from grizzly (dirty dirty dirt cheap) but the spindle hole is different from my lathe. I machined a bushing for my collet chuck to make the first one work. I guess I should machine another one for my new 6 jaw.

 

[Doug Gray]

You've got gauge blocks Right?

 

[KevinM]

You've got gauge blocks Right?

I'll add that to today's order. Pin gauges too.

 

[erikmannie]

Ever since I started buying welding & machining equipment, I have run our finances into the ground. My wife is beside herself. I spent so much that I am now actually at the point where if I spend any more we will lose our house.

 

[Ken226]

A good set of reamers come in handy on occasion.

 

[KevinM]

A good set of reamers come in handy on occasion.

I have letter and fractional reamers. Maybe I should get some good ones.

 

[Aukai]

Erik, you know you have the OCD compulsion, you have to think of your wife. I hope I'm not upsetting you, I know your dealing with a lot, but your wife deserves some consideration too. Just my humble advice.....

 

[kb58]

To the OP, your complaints are due to the basic mistake of walking into a church and asking if their religion is the right one. Of course!

 

[davidpbest]

And for your convenience, the attached list has direct links to purchase each item.

 

[KevinM]

And for your convenience, the attached list has direct links to purchase each item.

I already have 90% or more of those items, some in smaller sizes that better suit my machinery. A dividing head in on the short list. I also need/want to get a/some Mitutoyo micrometer(s) to help fill out my instrument collection. I have enjoyed their products for 30 years.