Need parallel and thin hardened bar

lesrhorer

Registered
Registered
Joined
Jul 6, 2021
Messages
354
I accidentally damaged one of my parallels, so I would like to replace it. Does anyone have a spare 1/8" x 1-3/8" x 6" parallel I could buy?

Also, I would like to obtain a small, thin, hardened steel bar. The actual dimensions are not critical. Something around 0.050" x 0.5" x 4" or so. Does anyone have something like that they no longer need?
 
I accidentally damaged one of my parallels, so I would like to replace it. Does anyone have a spare 1/8" x 1-3/8" x 6" parallel I could buy?

Even if you find one, you’ll still need to get the use of a surface grinder so you can end up with a pair: it’s unlikely that two individual parallels from different sets will be the same height. Better to get an inexpensive set, then you’ll have spare pairs.
 
Even if you find one, you’ll still need to get the use of a surface grinder so you can end up with a pair: it’s unlikely that two individual parallels from different sets will be the same height. Better to get an inexpensive set, then you’ll have spare pairs.
Yes, I should have said a pair. Does anyone have a pair of parallels to sell?
 
Back
Top