• Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!

  • In order for the Member Map to work properly, you must allow Google services AND Hobby Machinist to know your location. These settings are found in your browser of choice and in your Hobby Machinist profile.

Winner Home Grown Cutter Grinder

Status
Not open for further replies.
Hopefully those sparks come from the grinding wheel and not from the motor end. Things are really coming together. Great project.

Stan
 
Motor runs very well. Quiet and RPMs are spot on.

"Billy G"

- - - Updated - - -

We should see things spinning and making sparks soon!!

I think we are looking at two or three more weeks.

"Billy G"
 
All that has to do with electrics is ready to mount when the time comes.

"Billy G"

102_0476 (800 x 531).jpg
 
Mounting plate for the motor and small junction box is done.

"Billy G"

102_0477 (800 x 531).jpg
 
Hey Bill. What type of belt will you be using? I'm gonna be working on a tool post grinder shortly and I'm looking for something that won't transmit vibration into the grinding wheel. I was thinking that the round polyurethane belt might be a good choice. What do you think?
 
I'm going to get some round ones made up. That black stuff at the Hardware Store that the heat together. Looks like a big "O-Ring" when it's done.

"Billy G"
 
I'm going to get some round ones made up. That black stuff at the Hardware Store that the heat together. Looks like a big "O-Ring" when it's done.

"Billy G"
Yup. OK good, we're on the same page. :)) I wasn't sure if that was going to be the best thing to use, but you confirmed it. Thanks
 
Something is the wrong color here! :LOL:

attachment.php?attachmentid=68982&stc=1&thumb=1&d=1391210086.jpg


I think the motor would look great painted the same color as the box.

I've been checking in but haven't said much because everything been okay until now! :rofl:

Oh, just a suggestion.
 
Tomorrow Dan. The base parts. will be the same color also. The work head will be what it is. Wait a gosh darn minute here. We can't say it will be done tomorrow, it will never get done. Tomorrow never ever gets here. When I wake up it's not tomorrow, it's today. Today is the tomorrow you worried about yesterday. So today we'll get it done Dan.

"Billy G"
 
Last edited by a moderator:
It's green, it's green. It will darken up as it dries Today will be an odds and ends day. I will tie up all the loose ends and start the wheel head.

"Billy G"

102_0478 (800 x 531).jpg
 
Status
Not open for further replies.
Back
Top