Trying to locate 4-step pulley

As promised, here's a picture showing the replacement pulley mounted in the band saw (it's the lower one in the photo). What a difference in high range! You can't tell in the photo, but while I was in there, I made some other modifications. The wiring was pretty sloppy, so I rewired the unit entirely - from the motor to the plug. Also, the motor was mounted on a wooden block (only reason I can think of was to use a relatively short drive belt that the prior owner had on hand). I modified it so that it now mounts directly onto the base, and it is much sturdier than before. I had an extra link belt lying around (the green one), so I used it for sizing. If fits so well, that I think I'm going to leave it on.

Again, thanks to all who offered advice on where to find the pulley. This machine has never run as good as it does now.

Regards,
Terry

You happy now, 34_40?

tjb said:

Again, thanks to all who offered advice on where to find the pulley. This machine has never run as good as it does now.
Regards,
Terry
You happy now, 34_40?

View attachment 255568

Click to expand...

Sure thing Boss! Actually, as I said earlier that I am thrilled to have been able to give some help. It was an easy search and it all came together in your favor. So that makes us both happy.. Right??

Again, I'm glad to have helped.

34_40 said:

Sure thing Boss! Actually, as I said earlier that I am thrilled to have been able to give some help. It was an easy search and it all came together in your favor. So that makes us both happy.. Right??

Again, I'm glad to have helped.

Click to expand...

Right!