Arboga RLM 3508-looking for manual

C

Chainsaw Driver

Active User
Registered
Joined
Feb 20, 2013
Messages
49
Good evening,
I just purchased an Arboga RLM 3508 radial arm drill press. Everything works great except the carriage won't move left or right. I finally turned it hard and the hand wheel moved but the gear isn't turning. I can see the shaft turning so I'm guessing I stripped a roll pin or something. I've looked all over the internet for a manual and have not been able to locate one. I'd be most appreciative if someone had a pdf they could share or knew where to find one. I appreciate your help.
 
4SSS, thank you so much for the reply. Unfortunately the 3508M is vastly different than the RLM, however the 3512 is very similar and I was able to view the exploded views and learn a little bit about how the machine is assembled. The search continues....... Thank you,
 
here's the one I have
 

Attachments

  • arboga drill press 1830.pdf
    1.4 MB · Views: 354
Thanks Karl, the head on yours is very similar to mine and I learned some additional information about the head. Very helpful, much appreciated.
 
Chainsaw Driver said:
Good evening,
I just purchased an Arboga RLM 3508 radial arm drill press. Everything works great except the carriage won't move left or right. I finally turned it hard and the hand wheel moved but the gear isn't turning. I can see the shaft turning so I'm guessing I stripped a roll pin or something. I've looked all over the internet for a manual and have not been able to locate one. I'd be most appreciative if someone had a pdf they could share or knew where to find one. I appreciate your help.
Click to expand...

Hey Chainsaw! I have to scoured the plains to find a manual I to have a Rlm3508, no luck on a hardcopy but the two best places I have found for info on these drills are these two links

Microsoft OneDrive

onedrive.live.com onedrive.live.com


Hopefully you can get your drill back and up to the task again!
 
You must log in or register to reply here.
Back
Top