angle plate

  1. vtcnc

    Angle Plate Fixtures for Atlas Horizontal Milling Machine

    I've been putting off another project for more than year and finally committed to getting started. In order to machine the base casting for the project, I decided to make some angle plate fixtures to bolt down to my Atlas Horizontal Milling Machine. The base casting needs to be flipped several...
  2. vtcnc

    Angle Plate for Atlas Milling Machine 2020-11-27

    Designed by Bryan Lund. Used on an Atlas MFC. The base is designed to fit on the full width of the milling machine table. The location of the keyway is noted in the print and the width of the keyway is 3/8" and fits the mill table t-slot. Use 3/4" long 5/16-18 flat head screws to secure the...
  3. Fabrickator

    Compound Angle Plate

    Most of you may know that I've been using my angle plate (AP) for a lot of my projects. So, I decided to make a compound for it to see what else I can come up with. I made the compound out of some left over material from the AP and I made it a drop-in style so it wasn't permanent. It provides...
Back
Top