ulma doctor

bridgeport series 1 table 9"x 48"

bridgeport 1J step pulley 1 hp 3 phase motor

1980 Bridgeport Series 1, 1J Step Pulley head, 1Hp

1980 Bridgeport Series 1, 1J Step Pulley head, 1Hp

1980 Bridgeport Series 1, 1J Step Pulley head, 1Hp

1980 Bridgeport Series 1, 1J Step Pulley head, 1Hp

I have a good friend on Google+ https://plus.google.com/u/0/108774772276210693588 he makes cool steam engines and other stuff in this video he built a walking beam engine from a vintage erector set he found at a swap meet. enjoy!

Hi guys, i was messing around in the shop last week. i made a couple videos of me playing with stepper motor drivers and pulse generators. i took a small bipolar stepper motor and controlled this motor with 2 different stepper drivers. i did the experiments to make comparisons between the 2...

I made reindeer from logs this year for fun and they turned out very cool. the bodies are made from cedar branches. the necks and heads are made from cherry branch, the antlers are manzanita brush the legs are apricot twigs. i used 1/16" e308l tig filler rod to attach the head and neck to the...

dual spindle milling machine

dual spindle milling machine

I scored on saturday! i got a collet rack from member @bfd, (Thanks Bill!!!) he couldn't use it because he didn't have a round column mill. i don't have a round column mill that needs the rack. i decided to modify it to suit another need on another machine with r8 spindles it's for my Trans...

i purchased a set of inexpensive collet block's from all-industrial tool supply for use in my lathe and milling machines. they were shipped fast and are very nicely finished, better than i thought i might get for the price. i don't have any connection to the company, but i had a good experience...

shop made MT2 tailstock #4 center drill arbor

shop made MT2 tailstock #4 center drill arbor

I use my Shenwai SW900B lathe to do a lot of my projects. this time i wanted to make a full-time tailstock center drill holder, the problem was that i never cut a morse taper before on a lathe. i doubted my ability to make a concentric tool with a MT2 taper that actually worked. that had to...

USN 00134 - 1943 Monarch 10EE s/n 17646

I was missing a chuck key for my Monarch 10EE, so i made one from stuff i had laying around. :grin: i got a 1" diameter piece of colled rolled unknownium that i thought i'd start off with. i turned a few thousandths off the diameter and faced the end off and parted off a 7" length for the key...

i'm modifying a lathe tool for use in my Ammco metal shaper. i need to reduce the shank to .375" X .800" here is a video of part of the process... skip to 2:40 if you don't wanna hear me blabbing :grin:

I had an itch to scratch. a simple task but one that i wanted to do for awhile. i wanted to make an extended lathe chuck wrench for my Hercus ARH Lathe. the 3 jaw chuck is beautiful, but if the jaws are extended out, you can bust a knuckle because of a short chuck wrench. don't ask how i know...