10" Brown and Sharpe Rotary Table Refurbish

Janderso

Jeff Anderson
H-M Platinum Supporter
Joined
Mar 26, 2018
Messages
8,352
Please see the pics. It was a fun project. I took it apart, degreased, evaporust and reassembly with some new paint.
Now, what to do with it? Sell it or use it? It is tight, the table fits into the base very tight but smooth as glass.

IMG_0402[1].JPG

IMG_0442[1].JPG

IMG_0436[1].JPG

IMG_0468[1].JPG

IMG_0469[1].JPG
 
Does anyone know about how old this 10” Brown and Sharpe May be?
I have decided to keep it for now, I have some ideas for a project or two where it will improve my skills and come in handy.
 
Hang on to it! It might not get used much, but when you come across a project where you need one you will be glad it's sitting there under the dust! :)

Ted
 
If you think about it , there's tons of things it can do over a vise or table. Plus with an angle plate it can be mounted at an angle or any angle with an adjustable angle plate. Give it a wipe of tacky oil and cover with a rag and stick it on a shelf. That's a top shelf table you have don't part with it . You'll never get a better made one.
 
Back
Top