10" Brown and Sharpe Rotary Table Refurbish

[Janderso]

If you think about it , there's tons of things it can do over a vise or table. Plus with an angle plate it can be mounted at an angle or any angle with an adjustable angle plate. Give it a wipe of tacky oil and cover with a rag and stick it on a shelf. That's a top shelf table you have don't part with it . You'll never get a better made one.

I never thought about an angle plate. I have seen the Vertex rotary tables that can be turned 90 degrees.
Good thinking.
Yeah, it's a well made tool. There is no slop anywhere. Smooth as glass.
It's a keeper.

 

[Bob Korves]

Keep it and use it!

 

[Janderso]

If you think about it , there's tons of things it can do over a vise or table. Plus with an angle plate it can be mounted at an angle or any angle with an adjustable angle plate. Give it a wipe of tacky oil and cover with a rag and stick it on a shelf. That's a top shelf table you have don't part with it . You'll never get a better made one.

Ha, I actually used it when I welded one of the grinder stands. A little spin, weld, a little spin, weld, you get the idea.

 

[dlane]

Hope you had ground on the part , not table.