-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
10” x 30” lathe master electrical problem
- Thread starter KUNGFOMATIC
- Start date
- Joined
- Mar 6, 2019
- Messages
- 66
thanks
- Joined
- Nov 27, 2012
- Messages
- 7,852
I posted in your other thread but it looks like you've been looking for the original manual? I still had it in my PC (I used to have a HF 8x14 but purchased a number of parts from Bob/LM).
The manual is not very detailed though (manual is the same for both the LM 8x14 & 9x30) but at least it has something on schematics. HF 8x14 manual doesn't cover any electrical. The 9x30 is pretty much the same as the 8x14 so wiring should be the same, just physical size is different. All made by Eagle Industries IIRC. http://www.cneagle.com
The manual is not very detailed though (manual is the same for both the LM 8x14 & 9x30) but at least it has something on schematics. HF 8x14 manual doesn't cover any electrical. The 9x30 is pretty much the same as the 8x14 so wiring should be the same, just physical size is different. All made by Eagle Industries IIRC. http://www.cneagle.com
- Joined
- Mar 6, 2019
- Messages
- 66
Thanks again for posting this, I was hoping it would be more thorough in details. Trying to find information on it has been a daunting task. I was also hoping to dimensions of the change gear bracket.