12x36 user manual or FAQ??

[Muskt]

SOLVED--12x36 user manual or FAQ??

Greetings.
While surfing through the threads, I stumbled on to a reference to a member created user guide or manual for the 12x36 PM Lathe.

I cannot find it!!

Anyone know of such a document, and its location...... Please.

I currently do not own a lathe; however, the PM 12x36 is high on my list of potential machines.

I just recently sold my Grizz G4000 after 10 years of use. I will soon be moving to America from Alaska, and the shipping cost for the little Grizz was excessive. I also sold my Grizz mill (same reason), and will also be looking for a replacement for that one. The PM 932 is high on that list.

I originally considered the 11x27lb; however, (again the big "however") i am not thrilled by the non-standard chuck mount, and I think I would like the separate feed and threading drives. Also, the seemingly endless wait time could exceed my remaining years.

Anyway, enough mindless rambling. If any of you folks know of the aforementioned manual or guide, could you post a link.

Thanks,
Jerry in Anchorage (for now)

 

[ricsmall]

Go to page 7 in the precision Matthews/LMS sub-forum and look close to bottom. Thread started by RayC

 

[Muskt]

Thanks for that.....
Man, sometimes the obvious is just hard to see. I appreciate it.

Jerry in Anchorage